Test Instruments

Ritelite’s range of test instruments includes Test lamps and Proving units, Multimeters, Insulation testers, Loop testers, Phase rotation meters, Clamp meters, Voltage detectors for medium and high voltages, voltage detectors, Seaward HV Test Equipment, CAT & Genny Cable Locators.

Megger TDR 1000/3 Cable Fault Finder

Handheld and portable for use in the field, the TDR 1000/3 is capable of locating faults at a distance of up to 15000ft.

View product

TWO WAY IEC LEADS

Two way IEC leads used for loop testing. Rated 300V, Cat III. Two probes (red positive and black negative) to IEC plug. Other types available.

View product

THREE WAY IEC LEADS

Three way IEC leads used for loop and RCD testers. Rated 300V, Cat III. Two probes (red and black) plus croc clip to IEC plug. Other types available.

View product

MV 10 TO 35 KV PHASE COMPARATOR

This device is suitable for comparating the phases of the live medium voltage systems to be connected to each other. MV 10 to 35KV.

View product

UNIPOLAR PHASE COMPARATOR

Unipolar phase comparator & voltage detector for medium voltage. For indicating voltage on medium voltage AC equipment or phase comparation.  

View product

PR11 PHASE COMPARISON

The PR11 provides a means of phase comparison at the point of paralleling two circuits, without the interposition of voltage transformers or secondary wiring circuits.

View product

KDIE POTENTIAL INDICATORS

Highly portable, neon and digital potential indicators. They provide a means of confirming the presence of voltage on earthed neutral electrical circuits.

View product

PR33D PHASE ANGLE COMPARISON

Provides a means of phase angle comparison and indication of phase angle voltage at the point of intended paralleling of two circuits on neutral earthed systems.

View product

HALO HOOK CURRENT SENSOR

The Halo hook-on ammeter has been designed for measuring current flow on overhead line systems up to 33 KV. Measures 0 - 2000 amps.

View product

MEGGER LT300 LOOP TESTER

The Megger LT300 offers high current loop testing over a wide range of frequencies and supply voltages with simple, fast, two wire operation.  

View product

KEWTECH 8031F PHASE ROTATION METER

Phase indicator designed to check the presence of open phase and phase sequence by rotating disk and lamps.

View product

MEGGER DET3TD EARTH & RESISTIVITY TESTER

Megger DET3TD earth & resistivity three pole testing kit, complete with lead and stake. 2 and 3 point testing.

View product

FLUKE 9040 PHASE ROTATION METER

The Fluke 9040 is effective for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems.  

View product

MX 350 CLAMP METER

Equipped with all the essential functions, the MX 350 clamp multimeter offers excellent handling and a particularly comfortable display.

View product

F09 CLAMP METER

A professional measurement tool (600V Cat.III). Fully automatic, TRMS AC+DC, the F09 is a must for all your measurements.

View product

TM/F3N CLAMP METER

An AC current analyser for measuring low and medium-power electrical installations with peak current circulating in the conductors of less than 1000A.

View product

B102 Earth Leakage Clamp

Designed for measuring leak current diverted towards the earth. It enables the fault to be located or anticipated without disconnecting the equipment linked.

View product

AMPFLEX A100 CLAMP METER

The AmpFLEX A100 series includes 9 models of flexible sensors that can be connected directly to all types of multimeter, wattmeter or recorder.

View product

ARNOUX CA6460 EARTH & RESISTIVITY TESTER

The reference for earth, resistivity and coupling measurement. In its rugged and sealed case, C.A. 6460 is easy to use.

View product

MEGGER MIT220 INSULATION TESTER

The MIT200 series is ideal for testing transformers, motors, generators, switchgear, panel building, domestic appliances, power tools etc.  

View product

JUNIOR TESTOSCOPE

Mains / earth leakage tester, can be used for a variety of electrical tests. Voltage range 150V to 450V. Contains a 2.2megohm resistor.

View product

JUNIOR TESTOSCOPE SLEEVED

Voltage range 150V to 450V. Contains a 2.2megohm resistor. This version has a waterproof sleave and the screwdriver is replaced by a point.

View product

CYCLIM VOLTAGE TEST LAMP

Cyclim voltage test lamp, 150-500V AC/DC. Voltage level across probes indicated by brightness of test bulb. For industrial and domestic use.

View product

PD690 PROVING UNIT

Produces 690V AC/DC to enable voltage indicators to be fully checked. This unit is suitable for indicators with 230V and 415 / 440V AC or DC detection ranges.

View product

FLUKE VOLT ALERT

VoltAlert™ AC voltage testers from Fluke. An easy to use voltage detector. Just touch the tip to a terminal strip, outlet, or cord. A red glow indicates voltage.

View product

MV3 TO 10KV VOLTAGE DETECTOR

It is used to indicate the rated voltage on medium voltage AC equipment. Used together with operating rods appropriate for the tested voltage levels.

View product

MV10 TO 35KV VOLTAGE DETECTOR

It is used to indicate the rated voltage on medium voltage AC equipment. Used together with operating rods appropriate for the tested voltage levels.

View product

HV 120KV VOLTAGE DETECTOR

It is used to indicate the rated voltage on medium voltage AC equipment. Used together with operating rods appropriate for the tested voltage levels.

View product

SOCKET TESTER

The CP501 Check Plug is a fast and easy way to ensure that 13A sockets are wired correctly, indicated by all three high brightness, long life neons illuminating.

View product

PFISTERER TESTER

The KP-Test 5 capacitive voltage detector can be used for indoor and outdoor medium voltage applications. It indicates the presence of operating voltage.

View product

MX23 MULTI-METER

The MX 23 is a 5000-count, digital, TRMS multimeter with high safety and accuracy. It gives the RMS value irrespective of the signal, sinusoidal or deformed.

View product

FLUKE 170 SERIES MULTI-METER

Fluke 170 Series DMMs are the industry-standard troubleshooting tools for electrical and electronic systems. All 170 Series DMMs are true-rms responding.

View product

DRUMMOND TEST LAMPS

A range of LED test lamp's with safe voltage indication from 50 - 500V AC / DC. Incorporates two test buttons, one on the body of the unit and one on the probe.

View product

Why choose Ritelite?

Wide range of stock held

Ritelite is able to supply a wide range of tools on a next day basis from its Lincolnshire warehouse.

Specialist site equipment supplier

Ritelite supplies many types of specialist equipment to support customer requirements.

Next Day Nationwide Delivery

Ritelite works closely with all major UK transport networks to ensure the best possible delivery service for our customers.

Technical Assistance Available

Ritelite are able to assist customers with product application and specification

Have a Question?

Speak to one of our experts. Our experienced team are available in the office Monday – Friday 8am until 5:30pm so please give us a call or send us your enquiry.

Contact us