Ritelite can supply a full range of earthing equipment including insulated operating rods and pruning heads, Clamp sticks, Specialist Application Heads, Low Voltage Earthing Kits, Earthing kits for covered conductor and Earth Clamp Application Heads, and operating rod bags.
Ritelite supplies many specialist tools to support customers requirements.
The Ritelite team have been continually developing new products to meet and exceed our customer’s requirements for over 30 years.
Ritelite works closely with all major UK transport networks to ensure the best possible delivery service for our customers.
Ritelite is able to supply a wide range of products on a next day basis from its Lincolnshire warehouse.
These Grip-All Sticks were designed to guarantee the safety distance and necessary insulation when working in electrical systems and are manufactured with fibreglass polyurethane foam filled poles, impregnated with epoxy resin.
The standard 1.2m sectional operating rods are constructed from top quality fibreglass reinforced epoxy resin to industry standards. Sections snap together with spring loaded push buttons. The bottom section is fitted with a rainshield. The top section is available with a range of end fittings. As many intermediate sections as necessary can be fitted to achieve the required working height.
The Triangular Shape Telescopic Hotstick was designed to provide the working distance and the insulation required to perform routine jobs in overhead electrical systems, being one of the most used tools in hot line maintenance.
Temporary continuity connectors for Metallic Cable Armour or Sheathing.
Ritelite (Systems) Ltd offer a range of Earth Kits for 11kV-33kV and we can provide bespoke Earth Kits to suit specific requirements. The major components consist of line end clamps, phase leads made from aluminum aluflex or copper conductors, pole mounted cluster bar and terminal plates, down leads, earth rods and earth end clamps. These are fitted to a conductor using operating poles and operating sockets.
With 7.5 teeth per 30mm For fast manual cutting Pole mounted version also available Japanese manufactured high quality Replacement blades available
Optional insulating inserts Optional adaptor to fit standard rods Cutting capacity: 40mm
Standard type is for bayonet earth clamps with slim taper. Optional type for bayonet earth clamps with thicker taper.
Short Circuiting Straps are used to short the positive and negative circuits of a d.c. feeder section. In the event of an emergency or inadvertent re-energisation of the supply the devices cause the supply protection to operate. PRODUCT CODE: EE/EFT16732-1
This equipment is for providing temporary earth bonds between overhead catenary or contact conductors and earthed rail sections or recognised earthing points.
The equipment types 'EE/TCODFB' and 'EE/TCODBH' TCOD's have been designed and type tested in order to meet the detailed requirements of Railtrack Line Specification RT/E/S/21136.
The Henley type fuse extractor tool offers an easy, simple and economical method to safely remove or install Henley overhead fuse carriers.
For the removal of Brush and J&P fuses. Fits intermediate poles. PRODUCT CODE: EE/ESBSH
For applying clip on clamps Other D type heads available PRODUCT CODE: EE/APPHEAD/EME
Speak to one of our experts. Our experienced team are available in the office Monday – Friday 8am until 5:30pm so please give us a call or send us your enquiry.
Contact us
