Overhead Line Construction Equipment

Ritelite offers a Comprehensive range of Overhead Line Construction Equipment available from stock including the Rite-Safe 830 Full Body Harness with bolt bag and tool frog accessories, Climbing irons and calf pads, Linesman Tools and Knives, Podgers, , Pole Erection Equipment, Pole Working Equipment, Shrouding, Pole Platforms & Installation Rollers and Pole numbering and tagging systems. Ritelite is also able to supply on a hire or buy basis conductor stringing equipment.

Why choose Ritelite?

30 Years’ Industry Experience

The Ritelite team have been continually developing new products to meet and exceed our customer’s requirements for over 30 years.

Specialist tool supplier

Ritelite supplies many specialist tools to support customers requirements.

Wide range of stock held

Ritelite is able to supply a wide range of tools on a next day basis from its Lincolnshire warehouse.

Next Day Nationwide Delivery

Ritelite works closely with all major UK transport networks to ensure the best possible delivery service for our customers.

Cross Arm Intermediate Roller

Maximum load 250Kgs Maximum cable diameter 40mm Cable retained by a removable pin Fits cross arm of maximum section width 110mm Designed to fit standard 11Kv and 33Kv cross arm Secure fixing clamps against the inner cross arm angle High quality die-cast aluminium sheaves

View product

Cross Arm Angle Roller

The cross arm angle roller (shown left) has a choice of lockable positions - vertical, 45º and 90º either side.

View product

INSULATOR MOUNTED ROLLERS ‘ANGLE’

Specially designed incorporating twin angled rollers provides a large bend radius. This device allows the user to drop the conductor directly onto the centre of the insulator saving time and effort. Suitable for Stringing 11/33Kv Conductors up to 330mm².

View product

E-Z TAGGING SYSTEMS

Pole Tagging, Warning Signs and Substation Numbering etc. High quality systems to suit any application. Co-extruded E-Z have a 25 year warranty and cannot fade. Yellow and black polyethylene are co-extruded, numbers or letters are machined through the yellow to expose black digits that cannot wea...

View product

WORKING STEPS

Designed as a temporary aid to the linesman when working for lengthy periods at the pole top. Particularly useful when working on section poles to improve access.

View product

INTERMEDIATE ROLLER

Suspended from pole hook for straight line runs. Split frame body with aluminium sheave on sealed roller bearings. Shorter hook one side allows easier removal of conductor.

View product

ULTRA LIGHT WEIGHT TRANSFORMER LIFTER

A specialist device to aid hoisting and positioning of pole transformers onto support platforms.

View product

FIXED POLE PLATFORMS

Aluminium Pole Platforms for varying situations. All models feature a serrated pole-gripping device and are light in weight and simple to apply. Manufactured in tubular aluminium, incorporating a non-slip open plate platform.

View product

STAYWIRE DISPENSER

Designed for safe and easy dispensing of Staywire. Two removable retaining arms allow the easy loading of Staywire coil. Centre eye automatically feeds Staywire when operated.

View product

STAY ROD PULLING EYE (PENGO)

Specialist device designed to permit safe tensioning of Pole stays. This pulling eye accommodates a range of stay rod diameters and provides a rated attachment point for the tensioning device. Commonly known as a PENGO. Test Certificate supplied Diameter range: 12.7 - 31.75mm Weight: 1363g

View product

POLE TURNING EQUIPMENT

Specialist tools designed for aligning dressed power and telecommunications poles Three types available to suit all applications

View product

POLE ERECTING SHEERLEGS

Designed to raise wood poles used in the construction of overhead Power and telecom lines. This device is particularly useful in remote situations where vehicle based methods of pole erection are impractical.Integral Hand winch for raising pole lifting collar.

View product

ACCUSHARP KNIFE SHARPENER

No more messy oils or stones. In about 10 seconds, sharpen knives (even serrated knives), cleavers, axes, machetes, and many other cutting tools. The large ergonomic handle fits either hand safely and securely.

View product

PETROL AUGER DRILL

The most dependable light weight portable drill on the market.

View product

CLIMBING IRONS WITH LEATHER CALF PADS

High quality spur type Climbing Irons, design specifically to meet the needs of Linesmen working on low, medium and high voltage wooden poles. A complete range of spare parts and sharpening equipment is available.

View product

CLIMBING IRONS WITH VELCRO CALF PADS

High quality spur type Climbing Irons with velcro pads, design specifically to meet the needs of Linesmen working on low, medium and high voltage wooden poles. A complete range of spare parts and sharpening equipment is available.

View product

CLIMBING IRONS WITH PLASTIC CALF PADS

High quality spur type Climbing Irons, design specifically to meet the needs of Linesmen working on low, medium and high voltage wooden poles. A complete range of spare parts and sharpening equipment is available.

View product

GAFF GAUGE

Assists with sharpening gaffs, checking gaff width, thickness and point profile.

View product

ANKLE & CALF STRAPS

Durable neoprene impregnated nylon. Calf straps are available in 2 different sizes. Ankle straps are also available and are sold in pairs.

View product

GAFF SHARPENING KIT

Contains 8" file, honing stone and gaff gauge.

View product

KLEIN TOOL BUCKETS

Polypropylene-rope handle reinforced with leather for water resistance and strength. Durable, straight-wall and tapered-wall buckets are made of heavy-duty canvas. High-density polyethylene top ring for strength and chemical resistance.

View product

FULL BODY HARNESS

Rite-Safe 830 Series - Leather belt full body harness, designed by Linesman for linesmen. The Rite-Safe 830 series harness was developed to meet the needs of Linesmen. Working closely with Linesmen at the development stage the harness incorporates innovative design features.

View product

CANVAS BOLT BAG

Opening: 235mm x 60mm Depth: 300mm

View product

Have a Question?

Speak to one of our experts. Our experienced team are available in the office Monday – Friday 8am until 5:30pm so please give us a call or send us your enquiry.

Contact us