Insulated Tools

Ritelite offers a full range of insulated tools under its Ritesafe brand. Ritesafe insulated tools are tested to 10,000VAC and are rated for 1000 VAC live line use. They are manufactured in Germany and are marked with the international 1000 volt symbol. They comply with EN60900 standard for insulated tools. The range includes Pliers and cable cutters, Spanners, Torque Wrenches, Ratchets and sockets, Knives, Hacksaws & a variety of special tools.

Why choose Ritelite?

30 Years’ Industry Experience

The Ritelite team have been continually developing new products to meet and exceed our customer’s requirements for over 30 years.

Specialist tool supplier

Ritelite supplies many specialist tools to support customers requirements.

Wide range of stock held

Ritelite is able to supply a wide range of tools on a next day basis from its Lincolnshire warehouse.

Next Day Nationwide Delivery

Ritelite works closely with all major UK transport networks to ensure the best possible delivery service for our customers.

ABC WEDGES

During the installation of connectors the phase conductors of an insulated overhead cable can be separated by using wedges. The wedge can also be used when installing suspension clamps.

View product

RUBBER INSULATION TOWELS 10M ROLL

Thickness 1 mm Red-orange 1200 mm wide

View product

CURVED CABLE STRIPPING KNIFE

Strong blade with curved blade Grip from tough-elastic, impact- resistant plastic With blade cover

View product

HOOKED CABLE KNIFE

With hooked blade and flat tip for cable stripping Grip from tough-elastic, impact-resistant plastic With blade cover

View product

PHASE STRIPPING KNIFE

Blade with narrow straight edge for cable stripping Grip from tough-elastic, impact-resistant plastic With blade cover

View product

RUBBER TOWELS

To VDE 0680/1 1.6 mm thick with cloth padding

View product

PLASTIC FLAT NOSE PLIERS

For meter connections and meter locking All plastic

View product

INSULATING WEDGES

Large size with impact-resistant head Oval Without Sharp Edges LVS/742 (shown below) with groove for cable cutter

View product

13 PIECE SCREWDRIVER SET

1000V VDE approved screwdriver set with 11 interchangeable blades ( Flat 2.5, 3.0, 3.5, 4.0, 5.5, Phillips PH1 & PH2, Pozi PZ2, Torx T10, T15, T20), large comfort-grip handle and precision cap handle, together with a 1000V Cat IV audible and visual non-contact voltage detector (range 50-1000V).

View product

LONG 6 POINT SOCKETS

DIN 7448 With1/2" - Square Drive Chrome vanadium steel Forged, oil-hardened Length 80 mm

View product

12 POINT SOCKET

DIN 7448 With 3/8"-Square Drive Chrome vanadium steel forged, oil-hardened

View product

ALLEN KEY SCREWDRIVERS

DIN 7439 For hexagon screws From vanadium steel Oil-hardened Impact resistant handle made from tough plastic

View product

INDIVIDUAL SCREWDRIVERS

DIN 7440 For slotted screws Hardened For extreme high torque loads Insulated blade

View product

T-HANDLE SOCKET WRENCH

DIN 7440 precision steel tube hardened hex heat-treated for extremely long threaded bolts

View product

CROSS HEAD & POZI DRIVE INSULATED SCREWDRIVERS

A selection of Phillips cross head and Pozi-Drive head insulated screwdrivers.

  • DIN 7440
  • Hardened
  • For extreme high torque loads
  • Insulated blade

View product

HEXAGON NUT WRENCH

DIN 7445 Vanadium steel Oil-hardened Impact resistant handle made from tough plastic

View product

CABLE STRIPPING KNIFE

With straight, strong blade Grip from tough-elastic, impact-resistant plastic With blade cover

View product

COVERED CABLE STRIPPING KNIFE

With straight, partly insulated, strong blade Grip from tough-elastic, impact- resistant plastic With blade cover

View product

INSULATED STRIPPING KNIFE

For Plastic cable stripping With hooked cutting blade Grip from tough-elastic, impact-resistant plastic With blade cover

View product

PAPER KNIFE

With curved strong blade Grip from tough-elastic, impact- resistant plastic With blade cover

View product

GUTTA PERCH KNIFE

Strong blade with bowed cutting edge Handle grip from tough-elastic, impact- resistant plastic With blade cover

View product

ELECTRICIANS KNIFE

With curved blade partially insulated Grip from tough-elastic, impact- resistant plastic With blade cover

View product

REVERSIBLE RATCHET NOT MECHANICALLY LOCKED

Certified to EN 60900 specification Manufactured from chrome-vanadium-steel

View product

EXTENSION BARS

From chrome vanadium steel Basic spring ball socket retention

View product

EXTENSIONS WITH LOCK SCREW DEVICE

DIN 7434 Spring loaded retaining ball for automatic secure socket holding

View product

REVERSIBLE RATCHET WITH SOCKET RETAINING SYSTEM

Patented secure socket retaining system Manufactured from chrome-vanadium-steel Certified to EN 60900 specification

View product

TORQUE WRENCH ADAPTOR

DIN 3120/ISO 1174 Insulated to EN 60900 specification Manufactured from chrome-vanadium-steel Without locking device

View product

INSULATED RATCHET SPANNERS

Available in 8 - 19mm AF Avaliable on request

View product

CONNECTOR HOLDING TOOL

Used for easier adssembly of cables with connectors Stepless Adjustable Diameter between 15 - 40mm adjustable

View product

INSULATED PODGERS

High quality range of ratchet construction spanners Designed for professional and industrial use Heavy duty drop forged construction Reversible changeover pawl mechanism

View product

INSULATED ADJUSTABLE SPANNERS

Available in other lengths on request 762 - Chrome & 760 - BAHCO versions

View product

TORQUE WRENCH 1/4″

Insulated to EN 60900 specification With built-in reversible ratchet adjustable Length 200mm Suitable for 1/4"socket wrenches

View product

TORQUE WRENCH 3/8″

Insulated to EN 60900 specification With built-in socket retaining system Reversible ratchet Available in lengths of 280mm and 370mm Suitable for insulated 3/8" sockets

View product

TORQUE WRENCH 1/2″

Insulated to EN 60900 specification Without mechanically locked socket system Reversible ratchet Length 200mm approx Suitable for insulated 1/2" sockets

View product

CABLE & CORE CUTTERS

Steel wire CU & Alu 120sq mm capacity Spare blades available

View product

CABLE CUTTERS WITH LEVERAGE TRANSMISSION

To cut Cu & Al cables. With leverage transmission. Replacement blades available.

View product

DOUBLE BLADE CUTTERS

Precision ground blades Single handed use Dropped forged For soft Cu & Alu Multi wire up to 50sqmm

View product

PARROT BREAK CUTTERS

Easy cutting Dropped forged For Cu & Alu Multi wire up to 500sqmm

View product

RATCHET CABLE CUTTERS

Single handed operation Locking lever CU & Alu up to 240sq mm Cuts fine stranded copper cable

View product

COMBINATION PLIERS

Forged & Oil Hardened Induction Hardened Cutting Edges

View product

SIDE CUTTERS

DIN ISO 5746 Forged & Oil Hardened. Induction Hardened Cutting Edges Suitable For Hard Wire Cutting

View product

LEAD SEALING PLIERS & SIDE CUTTERS

DIN ISO 5746 Forged & Oil Hardened. Replaceable indent letters

View product

LONG NOSE PLIERS

Forged & Oil Hardened. Induction Hardened Cutting Edges Suitable For Hard & Soft wire cutting

View product

SHORT FLAT NOSE PLIERS

Forged & Oil Hardened. Induction Hardened Cutting Edges Short Strong Jaws Toothed Clamping Jaws

View product

LONG FLAT NOSE PLIERS

Forged & Oil Hardened Induction Hardened Cutting Edges Suitable For Hard Wire Cutting Long Jaws

View product

END WIRE STRIPPERS 0.5 – 5MM

For wire from 0.5mm to 5mm Self Adjusting Cutting Hole for Separating Cable and Stranded Wire

View product

END WIRE STRIPPERS

Adjusting Screw Wire from 0.5-5mm Ø (up to 10mm²)

View product

HEAVY DUTY SIDE CUTTERS

Heavy duty For Hard wire Designed for linesman

View product

SLIDE ADJUSTABLE WATER PUMP PLIERS

Heavy Duty Slide Adjustment Chrome Vanadium

View product

INSULATED BELLING TOOL

The Hepworth Belling-Tool has been developed to enable jointers to bell cable earth sheaths during live jointing, where avoiding damage to insulation and observance of safety procedures are of primary importance. The tool is suitable for use on both lead and aluminium sheaths, although extra care is...

View product

HEPNYF INSULATED HACK-KNIFE

The Hepnyf was originally developed for stripping the lead sheath from PILC cables; more recently it has found widespread application in the removal of the bedding compound from Waveform CNE cables, without damage to the soft aluminium neutral earth wires.

View product

Have a Question?

Speak to one of our experts. Our experienced team are available in the office Monday – Friday 8am until 5:30pm so please give us a call or send us your enquiry.

Contact us