Ritelite’s range of test instruments includes Test lamps and Proving units, Multimeters, Insulation testers, Loop testers, Phase rotation meters, Clamp meters, Voltage detectors for medium and high voltages, voltage detectors, Seaward HV Test Equipment, CAT & Genny Cable Locators.
Handheld and portable for use in the field, the TDR 1000/3 is capable of locating faults at a distance of up to 15000ft.
Two way IEC leads used for loop testing. Rated 300V, Cat III. Two probes (red positive and black negative) to IEC plug. Other types available.
Three way IEC leads used for loop and RCD testers. Rated 300V, Cat III. Two probes (red and black) plus croc clip to IEC plug. Other types available.
This device is suitable for comparating the phases of the live medium voltage systems to be connected to each other. MV 10 to 35KV.
Unipolar phase comparator & voltage detector for medium voltage. For indicating voltage on medium voltage AC equipment or phase comparation.
The PR11 provides a means of phase comparison at the point of paralleling two circuits, without the interposition of voltage transformers or secondary wiring circuits.
Highly portable, neon and digital potential indicators. They provide a means of confirming the presence of voltage on earthed neutral electrical circuits.
Provides a means of phase angle comparison and indication of phase angle voltage at the point of intended paralleling of two circuits on neutral earthed systems.
The Halo hook-on ammeter has been designed for measuring current flow on overhead line systems up to 33 KV. Measures 0 - 2000 amps.
The Megger LT300 offers high current loop testing over a wide range of frequencies and supply voltages with simple, fast, two wire operation.
Phase indicator designed to check the presence of open phase and phase sequence by rotating disk and lamps.
Megger DET3TD earth & resistivity three pole testing kit, complete with lead and stake. 2 and 3 point testing.
The Fluke 9040 is effective for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems.
Equipped with all the essential functions, the MX 350 clamp multimeter offers excellent handling and a particularly comfortable display.
A professional measurement tool (600V Cat.III). Fully automatic, TRMS AC+DC, the F09 is a must for all your measurements.
An AC current analyser for measuring low and medium-power electrical installations with peak current circulating in the conductors of less than 1000A.
Designed for measuring leak current diverted towards the earth. It enables the fault to be located or anticipated without disconnecting the equipment linked.
The AmpFLEX A100 series includes 9 models of flexible sensors that can be connected directly to all types of multimeter, wattmeter or recorder.
The reference for earth, resistivity and coupling measurement. In its rugged and sealed case, C.A. 6460 is easy to use.
The MIT200 series is ideal for testing transformers, motors, generators, switchgear, panel building, domestic appliances, power tools etc.
Mains / earth leakage tester, can be used for a variety of electrical tests. Voltage range 150V to 450V. Contains a 2.2megohm resistor.
Voltage range 150V to 450V. Contains a 2.2megohm resistor. This version has a waterproof sleave and the screwdriver is replaced by a point.
Cyclim voltage test lamp, 150-500V AC/DC. Voltage level across probes indicated by brightness of test bulb. For industrial and domestic use.
Produces 690V AC/DC to enable voltage indicators to be fully checked. This unit is suitable for indicators with 230V and 415 / 440V AC or DC detection ranges.
VoltAlert™ AC voltage testers from Fluke. An easy to use voltage detector. Just touch the tip to a terminal strip, outlet, or cord. A red glow indicates voltage.
It is used to indicate the rated voltage on medium voltage AC equipment. Used together with operating rods appropriate for the tested voltage levels.
It is used to indicate the rated voltage on medium voltage AC equipment. Used together with operating rods appropriate for the tested voltage levels.
It is used to indicate the rated voltage on medium voltage AC equipment. Used together with operating rods appropriate for the tested voltage levels.
The CP501 Check Plug is a fast and easy way to ensure that 13A sockets are wired correctly, indicated by all three high brightness, long life neons illuminating.
The KP-Test 5 capacitive voltage detector can be used for indoor and outdoor medium voltage applications. It indicates the presence of operating voltage.
The MX 23 is a 5000-count, digital, TRMS multimeter with high safety and accuracy. It gives the RMS value irrespective of the signal, sinusoidal or deformed.
Fluke 170 Series DMMs are the industry-standard troubleshooting tools for electrical and electronic systems. All 170 Series DMMs are true-rms responding.
A range of LED test lamp's with safe voltage indication from 50 - 500V AC / DC. Incorporates two test buttons, one on the body of the unit and one on the probe.
The Ritelite team have been continually developing new products to meet and exceed our customer’s requirements for over 35 years.
Ritelite Systems is a British company delivering high quality, British designed and manufactured products nationwide and abroad.
Our in-house technical team’s in-depth knowledge of battery charging and LED technology enables us to continue to be a global market leader for professional and industrial lighting products.
Ritelite’s Business Management system is accredited to ISO 9001 and 14001: 2015 standards helping to ensure we deliver high quality products and services to our customers.
Speak to one of our experts. Our experienced team are available in the office Monday – Friday 8am until 5:30pm so please give us a call or send us your enquiry.
