Ritelite’s range of Cable Preparation Equipment includes cable cutters and ratchet cutters for Copper, Aluminium and ACSR conductors and Fibre Cable. Bolt cutters, Battery Powered cable cutters, and remote hydraulic cable cutting heads. Crimping tools, Hand Hydraulic & Dieless Compression tools and Battery Powered Hydraulic compression tools, Hydraulic pumps, Insulated Core Separators, Cable cleaning wipes and insulated gloves. Cable and conductor stripping tools.
Designed to strip outer sheaths, semi conductive layer and to remove the primary insulation on 11kV - 95/185/300mm² cables. Includes various accessories.
Klauke battery powered hydraulic cutting tool 45mm diameter. Suitable for CU and Al cables, and Al/St wires (ACSR).
Battery powered hydraulic crimping tool. C-head with very wide crimping range up to 400mm2. 120 kN crimping force.
Battery powered hydraulic crimping tool 16-400mm2. It has a large cross section range up to 400mm2. 120 kN crimping force.
Battery powered hydraulic crimping tool 6-150mm2. It has a large cross section range up to 150mm2. Slim crimping head.
Klein battery operated 12-tonne crimper kit. Crimps copper, aluminium and ACSR with 12 tonnes of force.
Klein battery operated 12-tonne crimper kit. Crimps copper, aluminium and ACSR with 12 tonnes of force.
The ONLY mechanically operated cable cutter to cut STEEL WIRE ARMOURED (Non Hardened Steel) Cables.
Take the strain out of repetitive cutting of cables with a 18v li-ion battery powered heavy duty rechargeable cable cutter.
An essential lever action heavy duty cable lug hex crimper with rotating dies and a crimping capacity that ranges between 06 – 120mm.
Flexible transparent or orange coloured shrouding used to protect engineers working with live voltages up to 1000V.
Scissor head type cutter suitable for cutting cables and core cutting of multicore cables. Ideal where access is limited.
For shaving the semi-conductive layer (bonded-vulcanised type) on medium/high voltage XPLE insulated cables.
A cable sheath cutter & insulation removal tool with a range of ø15-50mm. Removes outer sheath and XLPE insulation.
Special stripping tool for the removal of peelable semi-conductive screen on cold stripping MV and HV cables.
A range of plastic insulated wedges with an impact resistant head and a non-slip feature designed with an oval shape for no sharp edges.
The NP400 is designed for cutting the hard insulation on BLL and BLX conductors. Approved by conductor manufacturers.
Consac Sheath Cutter designed to cut the aluminium sheath on Consac cable to facilitate joining and terminating using cutting wheels.
A range of individual wheels suitable for different cutting depths. Prevents cutting into the cables live core. For use with consac sheath cutters.
Used as an outer glove. Silicone grain leather, very flexible. Large protective cuff in chrome tanned hide. Various sizes available.
Ideal storage for a pair of electrical safety gloves to prevent damage during transit, and UV damage. Made from reinforced fabric.
Used to provide separation between a cable core which is being cut and neighbouring cores. Produced in nylon (International Orange).
A multi-purpose cabinet key. Compact yet durable, designed for use with a wide range of applications including locking systems and valves.
Used to manipulate bare or insulated cable cores and to align the cores prior to jointing. Produced in nylon (International Orange). Can be for bare or covered cores.
Used to prise apart and to separate the cores of cables. Available in various materials including orange nylon , plastic and wood.
Designed to aid the separation of cores during jointing, these wedges are moulded in nylon to resist detrimental wear at the tip during normal use.
A pair of insulated rubber gloves available in a wide variety of thickness and size that conform to international IEC-60903 standard.
A highly durable metal box with 15 compartments which is ideal for storage of dies, components, screws or other accessories.
Cutting capacity up to 4/0 ACSR or 120mm. Cutting dies for various Klauke tools including HK60UNV, EK60UNV and EK60UNV-L.
Burndy 'W' dies are designed for reliable and controllable electrical connections. They are part of a colour-coded system.
Burndy ‘U’ dies are designed for reliable and controllable electrical connections. They are part of a colour-coded system.
The S-50 is a one handed universal cutting tool with ratchet mechanism. It has a patented construction, with interchangeable cutting blades.
Cuts multi-stranded, copper or aluminium cables. Cuts fine and superfine stranded copper cables.
Specially designed for cutting bolts, loaded cables and lines. Good up to 7,000V (test voltage 20,000V)
Speak to one of our experts. Our experienced team are available in the office Monday – Friday 8am until 5:30pm so please give us a call or send us your enquiry.
