Cable Preparation Equipment

Ritelite’s range of Cable Preparation Equipment includes cable cutters and ratchet cutters for Copper, Aluminium and ACSR conductors and Fibre Cable. Bolt cutters, Battery Powered cable cutters, and remote hydraulic cable cutting heads. Crimping tools, Hand Hydraulic & Dieless Compression tools and Battery Powered Hydraulic compression tools, Hydraulic pumps, Insulated Core Separators, Cable cleaning wipes and insulated gloves. Cable and conductor stripping tools.

Cable Preparation

XLPE Cable Stripping Kit

XLPE FULL CABLE STRIPPING KIT

Designed to strip outer sheaths, semi conductive layer and to remove the primary insulation on 11kV - 95/185/300mm² cables. Includes various accessories.

Klauke ESGM45CFB

Klauke ESGM 45 Hydraulic Cutting Tool 45mm

Klauke battery powered hydraulic cutting tool 45mm diameter. Suitable for CU and Al cables, and Al/St wires (ACSR).

Klauke EK12042CFB

Klauke EK 120/42 Hydraulic Crimping Tool 16-400mm2

Battery powered hydraulic crimping tool. C-head with very wide crimping range up to 400mm2. 120 kN crimping force.

Klauke EK120UCFB

Klauke 120 U Hydraulic Crimping Tool 16-400mm2

Battery powered hydraulic crimping tool 16-400mm2. It has a large cross section range up to 400mm2. 120 kN crimping force.

Klauke EK354CFB

Klauke EK 35/4 Hydraulic Crimping Tool 6-150mm2

Battery powered hydraulic crimping tool 6-150mm2. It has a large cross section range up to 150mm2. Slim crimping head.

Klein CT_BAT20-12T165

Klein Battery Operated 12-Tonne Crimper with Case

Klein battery operated 12-tonne crimper kit. Crimps copper, aluminium and ACSR with 12 tonnes of force.

Klein CT/BAT20-12T1651

Klein Battery Operated 12-Tonne Crimper Kit

Klein battery operated 12-tonne crimper kit. Crimps copper, aluminium and ACSR with 12 tonnes of force.

Ratchet Cutters - Steel Wire Armoured Cables

RATCHET CUTTERS FOR STEEL WIRE ARMOURED CABLES

The ONLY mechanically operated cable cutter to cut STEEL WIRE ARMOURED (Non Hardened Steel) Cables.

18V LI-ION BATTERY POWERED CABLE CUTTER

Take the strain out of repetitive cutting of cables with a 18v li-ion battery powered heavy duty rechargeable cable cutter.

GT 244410 Stripping Tool

STRIPPING TOOL FOR PEELABLE SEMI–CONDUCTIVE SCREEN

Special stripping tool for the removal of peelable semi-conductive screen on cold stripping MV and HV cables.

GB M20 Insulation Remover

CABLE SHEATH & INSULATION REMOVAL TOOL

A cable sheath cutter & insulation removal tool with a range of ø15-50mm. Removes outer sheath and XLPE insulation.

Cable Shaver

SHAVER FOR BONDED SEMI-CONDUCTIVE SCREEN

For shaving the semi-conductive layer (bonded-vulcanised type) on medium/high voltage XPLE insulated cables.

Joint & Shrouding Kits

1000V JOINTING & CONSAC SHROUDING KITS

Flexible transparent or orange coloured shrouding used to protect engineers working with live voltages up to 1000V.

HCC 095H

SCISSOR TYPE HYDRAULIC CUTTING HEAD

Scissor head type cutter suitable for cutting cables and core cutting of multicore cables. Ideal where access is limited.

Insulated Wedge

PLASTIC WEDGES

A range of plastic insulated wedges with an impact resistant head and a non-slip feature designed with an oval shape for no sharp edges.

Torque Limiting Screwdriver GT T5248788

TORQUE LIMITING SCREWDRIVER

A torque limiting screwdriver, mainly used by cable jointers where a specific torque setting is required on cable connectors or clips.

Cutting Wheels

CUTTING WHEELS

A range of individual wheels suitable for different cutting depths. Prevents cutting into the cables live core. For use with consac sheath cutters.

NP-400 Cable stripping tool

NP400 BLX/BLL INSULATION STRIPPING TOOL

The NP400 is designed for cutting the hard insulation on BLL and BLX conductors. Approved by conductor manufacturers.

Consac Sheath Cutting Tool GT CONMK3

CONSAC SHEATH CUTTING TOOL

Consac Sheath Cutter designed to cut the aluminium sheath on Consac cable to facilitate joining and terminating using cutting wheels.

Glove Storage Bag

GLOVE STORAGE BAG

Ideal storage for a pair of electrical safety gloves to prevent damage during transit, and UV damage. Made from reinforced fabric.

Outer Gloves

OUTER GLOVES

Used as an outer glove. Silicone grain leather, very flexible. Large protective cuff in chrome tanned hide. Various sizes available.

Insulated rubber gloves

INSULATED RUBBER GLOVES

A pair of insulated rubber gloves available in a wide variety of thickness and size that conform to international IEC-60903 standard.

Multi Purpose Cabinet Key

MULTI-PURPOSE CABINET KEY

A multi-purpose cabinet key. Compact yet durable, designed for use with a wide range of applications including locking systems and valves.

Core Separator

CORE SEPARATORS

Designed to aid the separation of cores during jointing, these wedges are moulded in nylon to resist detrimental wear at the tip during normal use.

Cable Core Guard

CABLE CORE GUARD

Used to provide separation between a cable core which is being cut and neighbouring cores. Produced in nylon (International Orange).

Cable Core Wedge

CABLE CORE WEDGES

Used to prise apart and to separate the cores of cables. Available in various materials including orange nylon , plastic and wood.

Cable Core Twisters

CABLE CORE TWISTERS

Used to manipulate bare or insulated cable cores and to align the cores prior to jointing. Produced in nylon (International Orange). Can be for bare or covered cores.

Multi-Tool ACSR Cutter

4 to 6 Tonne Cutting Dies

Cutting capacity up to 4/0 ACSR or 120mm. Cutting dies for various Klauke tools including HK60UNV, EK60UNV and EK60UNV-L.

Die box

DIE BOX

A highly durable metal box with 15 compartments which is ideal for storage of dies, components, screws or other accessories.

Burndy U Dies

BURNDY ‘U’ TYPE DIES FOR 6 TONNE TOOLS

Burndy ‘U’ dies are designed for reliable and controllable electrical connections. They are part of a colour-coded system.

Burndy W Dies

BURNDY ‘W’ TYPE DIES FOR 4–6 TONNE TOOLS

Burndy 'W' dies are designed for reliable and controllable electrical connections. They are part of a colour-coded system.

Battery Cable Cutter

CC/ES32FLUK BATTERY POWERED CABLE CUTTER

Cuts multi-stranded, copper or aluminium cables. Cuts fine and superfine stranded copper cables.

Universal Cutter

S-50 UNIVERSAL RATCHET CUTTER

The S-50 is a one handed universal cutting tool with ratchet mechanism. It has a patented construction, with interchangeable cutting blades.

Bolt Cutters Insulated Handles

BOLT CUTTERS WITH INSULATED HANDLES, 15MM CAPACITY

Specially designed for cutting bolts, loaded cables and lines. Good up to 7,000V (test voltage 20,000V)

Why choose Ritelite?

35 Years' Industry Experience

The Ritelite team have been continually developing new products to meet and exceed our customer’s requirements for over 35 years.

British Manufacturer - In House Design and Development

Ritelite Systems is a British company delivering high quality, British designed and manufactured products nationwide and abroad.

Technical Expertise – Continually developing innovative solutions

Our in-house technical team’s in-depth knowledge of battery charging and LED technology enables us to continue to be a global market leader for professional and industrial lighting products.

Quality Products – supported by ISO 9001: 2015 accreditation

Ritelite’s Business Management system is accredited to ISO 9001 and 14001: 2015 standards helping to ensure we deliver high quality products and services to our customers.

Have a Question?

Speak to one of our experts. Our experienced team are available in the office Monday – Friday 8am until 5:30pm so please give us a call or send us your enquiry.

Back to top