Designed to charge the Ritelite K9 and K10 portable work lights this charger is a low cost yet quality battery charger which is compact in size. The input voltage is 100/240V as standard however other voltages and pin types are available. This charger has been designed to work with K9 and K10 portable worklights fitted with Sealed Lead Acid or LiFePO4 batteries. It is not suitable for use with lithium ion models.
Features
- Microprocessor controlled
- Auto restart detection (prevents recharge of full battery)
- Low charge recovery profile (soft start)
- Battery 7 stage charge profile
- Short-circuit protection
- Reverse polarity protection
- 3 LED display system
- Overrun timer
- Rated IP20
WHICH K9 / K10 PORTABLE WORKLIGHT IS THIS CHARGER COMPATIBLE WITH?
The table below shows the battery types that this charger is compatible with.
| CHARGING SOLUTION TYPE | BATTERY CONFIGURATIONS | |||||
|
SLA |
SLA+ |
LiFePO4 |
LiFePO4+ |
L2 |
L2X2 |
|
 |
 |
|
|
 |
|
|
12V BATTERY CHARGERS
Can be used with any SLA / LiFePO4 unit not fitted with a VEPAC internal battery charger.
Most K9 and K10 units have a coloured lozenge on the serial label, also on the label on the light head of the K9. This will be one of six types as shown in the table above. If there is no clear lozenge please contact our sales team and they’ll be able to confirm which type you have from the product code on the unit.
Charging solutions shown on this page are UK spec (type G). Please confirm mains input cable type required with our sales team when ordering. Various country appropriate mains cables available per product type on request.
